AG STORE AG3000 - Page 9

8
1 Cleaning and changing filter ,HEPA and sponge for air-inlet
(1) After opening the dust-glass cap subassembly,

(2) HEPA
(3) HEPA 
(4)
 sponge ry them completely.
(Sponge and HEPA is rinsed by brush.)

2 Changing filter for air-outlet
(1) Open the grille for air-outlet.
(2) When open the grille for air--outlet is found.
(3) Ta
(4) Close the grille for air-outlet.