Assembly Instructions
Step 25:
Page 20 of 23
Slot the end of the cord through the middle
of the next V-Ring or loop along.
Now slot the end back through the net and
down through the next V-Ring. Continue
to do this until you have used up nearly all
the cord then tie the end around a V-Ring.
Tie another cord to this V-Ring and
continue until all of the net is secured.
The trampoline is now fully assembled.
Step 26: (Optional Sunshade Assembly)
Part O - Sunshade - 1 pc
Elastic - 6 pcs
To Next Page
Loading...
