Assembly Instructions
Step 23:
Step 24:
Page 24 of 27
Find the ROD on top of enclosure netting.
Stand on the trampoline and insert one of
the exposed sections of the rod into a
plastic grip on top of one of the enclosure
tubes.
Tie the end of the cord around one of the
V-Ring attachments located on the mat.
Push the cord through a hole at the
bottom of the netting.
Important: Keep the cord tight at all times.
Slot the cord through the middle of the
next V-Ring, then through the net and
down through the next V-Ring. Continue
to do this until you have used up nearly all
the cord then
tie this end around a V-Ring.
Tie another cord to this V-Ring and
continue until all of the net is secured.
To Next Page
Loading...
