This document provides assembly instructions for the AGB Scivola range of hardware kits for sliding doors. The Scivola system offers various handle and lock configurations, categorized by shape (round or square) and specific features.
Function Description
The AGB Scivola system is a comprehensive solution for outfitting sliding doors with handles and locking mechanisms. It includes various components such as handles, locks, strikers, and associated hardware, designed to ensure smooth operation and secure closure of sliding doors. The system is modular, allowing for different combinations of handles and locks to suit specific aesthetic and functional requirements.
Important Technical Specifications
The manual details various kits, each with a specific set of components and corresponding milling diagrams. Key dimensions and specifications are provided for different Scivola models:
General Specifications:
- Screws: 4x20 mm screws are commonly used for fixing components.
- Allen Key: A 3 mm allen key is required for fastening expanding spindles.
- Milling Diameter for Pockets: Ø25 mm is specified for the pocket where the tray is inserted.
- Spindle Diameter: Ø48 mm is a common diameter for spindle holes.
Scivola TT (Round Shape Handles):
- Lock Body Dimensions:
- Height: 128 mm
- Width: 16 mm
- Backset: 50 mm from the edge to the center of the spindle.
- Overall depth: 31 mm
- Distance between fixing points: 70 mm and 106 mm.
- Handle Plate Dimensions:
- Height: 168 mm
- Width: 50 mm
- Spindle hole center from top edge: 35 mm
- Lock body center from top edge: 47.5 mm (for kits with lock)
- Distance from bottom edge to spindle hole center: 120 mm
- Milling for handle: Ø48 mm
- Milling for lock: Ø25 mm
- Overall height for milling diagram (H): 1015 mm
- Handle plate width: 145 mm
- Handle plate thickness: 14 mm
- Edge to spindle center: 50 mm
- Edge to lock center: 68 mm
Scivola T (Round Shape Handles):
- Lock Body Dimensions:
- Height: 65 mm (for standard lock)
- Height: 168 mm (for lock with striker)
- Width: 16 mm
- Backset: 50 mm from the edge to the center of the spindle.
- Overall depth: 31 mm
- Distance between fixing points: 70 mm and 106 mm.
- Handle Plate Dimensions: Similar to Scivola TT, with specific variations for different kits (e.g., Kit A*, Kit B*, Kit E, Kit M*, Kit Q, Kit E Venti5, Kit Q Venti5).
- Milling for handle: Ø48 mm
- Milling for lock: Ø25 mm
- Overall height for milling diagram (H): 1015 mm
- Handle plate width: 145 mm
- Handle plate thickness: 14 mm
- Edge to spindle center: 50 mm
- Edge to lock center: 68 mm
Scivola Tre (Square Shape Handles):
- Lock Body Dimensions:
- Height: 160 mm
- Width: 16 mm
- Backset: 50 mm from the edge to the center of the spindle.
- Overall depth: 31 mm
- Distance between fixing points: 70 mm and 100 mm.
- Backset for E=35/40/50 and E=35/50 models.
- Handle Plate Dimensions:
- Height: 160 mm
- Width: 50 mm
- Spindle hole center from top edge: 21 mm
- Distance from bottom edge to spindle hole center: 117 mm
- Milling for handle: Ø48 mm
- Milling for lock: Ø25 mm
- Overall height for milling diagram (H): 1015 mm
- Handle plate width: 145 mm
- Handle plate thickness: 14 mm
- Edge to spindle center: 50 mm
- Edge to lock center: 68 mm (for some kits)
- Edge to lock center: 20 mm (for some kits)
Scivola Tre Class (Square Shape Handles):
- Lock Body Dimensions:
- Height: 196 mm
- Width: 18 mm
- Backset: 50 mm from the edge to the center of the spindle.
- Overall depth: 35 mm
- Distance between fixing points: 70 mm and 105 mm.
- Handle Plate Dimensions:
- Height: 196 mm
- Width: 50 mm
- Spindle hole center from top edge: 45 mm (for some kits)
- Spindle hole center from top edge: 51 mm (for some kits)
- Distance from bottom edge to spindle hole center: 130 mm
- Milling for handle: Ø48 mm
- Milling for lock: Ø25 mm
- Overall height for milling diagram (H): 1050 mm
- Handle plate width: 18 mm
- Handle plate thickness: 16 mm
- Edge to spindle center: 50 mm
- Edge to lock center: 68 mm
Lock with Key Only:
- Kits with key holes can be supplied with a reduced neck key (version no. 525), except for codes already listed in the price list.
- All Scivola locks are compatible with the current handles, even if not included in the kit.
Usage Features
The Scivola system is designed for ease of installation and user-friendly operation.
- Handle Types: Available in both round (Scivola TT, Scivola T) and square (Scivola Tre, Scivola Tre Class) shapes to match different interior designs.
- Locking Mechanisms: Includes various lock types, from simple passage sets to key-operated locks, offering different levels of security and privacy.
- Pull-Out Lever (Levetta di trascinamento): Some models feature a pull-out lever for easy retrieval of the sliding door from its pocket. This lever is activated by pressing down on a specific part of the handle, causing it to extend and provide a grip.
- Compatibility: All Scivola locks are compatible with the handles listed in the catalog, ensuring flexibility in component selection.
Maintenance Features
The manual provides instructions for assembly, which inherently includes aspects related to maintenance and proper functioning:
- Silicone Application: It is recommended to apply silicone to the interior angle of the plates (rosette) to prevent rotation and ensure a secure fit. This also helps in fixing the plates and the finger pull to the door.
- Proper Installation: Correct installation, as detailed in the "Sequenza di montaggio componenti" and "Sequenza di montaggio vaschetta e incontro" sections, is crucial for the longevity and smooth operation of the hardware. This includes:
- Lock Installation: Fitting the lock and clamping it with two 4x20 mm screws.
- Handle Installation: Positioning the handles into the Ø48 mm holes, ensuring the spindle is correctly inserted and not cut.
- Fastening Handles: Securing the handles by screwing the expanding spindle with a 3 mm allen key.
- Striker Placement: Positioning the striker on the frame according to the gasket thickness.
- Tray and Striker Installation:
- Marking the frame by gently pushing the sash and pulling out the hook.
- Milling a Ø25 mm pocket for the tray.
- Inserting the cover tray and placing the striker to align circular profiles, then fastening with two screws.
By following these instructions, users can ensure the proper functioning and extended lifespan of their AGB Scivola sliding door hardware.
To Next Page
Need help?
General
