1.3.6 Clean area
Thoroughly clean work area, machine, systems
and components before starting work. Dirty and
greasy areas can create work hazards.
Fig. 34
1.3.7 Understanding correct service
• Light working area correctly and adequately;
•
Use correct safety lights with wire safety
cages;
• Exposed bulbs can ignite fluids;
• Catch draining fluids in appropriate containers;
• Never use beverage containers to store
chemicals that could mislead personnel to drink
from them.
Fig. 35
1.3.8 Use correct tools
• Use the correct equipment and procedures;
•
Make-shift tools and procedures create safety
hazards;
• Use power tools only to loosen threaded parts
and fasteners;
• Use only SAE tools with SAE fasteners and
metric tools with metric fasteners.
Fig. 36
1.3.9 Support machine correctly
• Never support machine on cylinder blocks,
hollow tiles or supports that may crumble;
•
Never work under a machine only supported by
a jack;
• Use wheel chocks to prevent machine from
moving.
Fig. 37
1. General
RoGator 600C 1-17
644410-1
To Next Page
Loading...
Need help?
General
