4.12.2 Install the Blind Knives
Procedure
1. Storage for the removed knives is behind the
side door on the right and you attach them
with a cotter pin.
2. Go in the machine and push the blind knives
diagonally down to the knife axle.
3. Turn the lever of the knife axle up.
GUID-7BCC9FA9-D338-47D4-AA4C-7C0FE4E82600-high.jpg [High]
Fig. 19
4. Release the tailgate with the hydraulic shut-
o valve (1).
5. Close the tailgate with the controller in the
tractor.
6. Lift the feed channel floor up with the
controller and double acting valve in the
tractor.
7. Retract the cutting device with the controller
and double acting valve in the tractor.
GUID-C48609A9-2383-4517-88C6-EC588EF591FA-high.jpg [High]
Fig. 20
GUID-33A8BCDC-BA7F-487D-A314-B39FADBF7DC5 [V1]
4. Maintenance and Lubrication
Baler Wrapper Combination 133
4900.LE.EN01