AGFA CR 10-X Service Manual

DD+DIS155
.11E
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
NX Status in the NX configuration menu: General  General Settings
# Parameter Value
1 ID station name (= Computer name) DefaultNX
2 Performed Station AE Title NX_DEFAULT
3 Processing station name local host
4 Port 104
5 Default Modality CR
6 Fast Preview Settings - AE Title FAST_DEFAULT
7 Fast Preview Settings - Port number 3729
8 Fast ID - AE Title IDEN_DEFAULT
9 Fast ID - Port number 3216
10 IP address 192.192.192.193 (fixed)
Figure 5
Users setup on NX workstation:
User User Name Password
Service user Refer to web based training
Standard NX user Agfa Agfa4CR10 (for CR 10-X*) or
Agfa4CR12 (for CR 12-X**)
* CR 10-X, subtype 100 or CR Reader, subtype 110
** CR 12-X, subtype 200 or CR Advanced Reader, subtype 210
Edition 1, Revision 4 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 1 / Page 9 of 47
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential

AGFA CR 10-X Specifications

General

Brand	AGFA
Model	CR 10-X
Category	Medical Equipment
Language	English