Agile Helicopter is a Trademark of Flight Research Rc Europe , Proudly made by KDS Model Shenzhen
Page 21
9.组装说明 ASSEMBLY SECTION
尾管
Tail boom
杯头内六 角螺丝
Hexagon socket
head cap screws
M3X12
杯头内六 角螺丝
Hexagon socket
head cap screws
M3X6
碳纤垂 直 翼
CF Vertical stabilizer
螺丝垫片
Screw gasket
尾撑杆固 定座
Tail boom brace rob mount
杯头内六 角螺丝
Hexagon socket
head cap screws
M3X8
热缩套管
Heat-shrinkable sleeve
螺母M 2
Nut
尾拉杆 固 定座
Tail boom brace
mounting ring
杯头内六 角螺丝
Hexagon socket head
cap screws
M2X10
尾撑杆装好 再锁紧此螺 丝
After the Tail boom brace rob
is installed, tighten the screw
皮带在尾 管内不能有 扭绕现象，尾管前端皮带和尾桨转动如图示 为正确方向
Belt shall not be crossed twisted in the tail boom, the front end and tail rotor
shall rotate correctly as shown
To Next Page
Loading...