Chapter 13 611
Softkey Descriptions
Softkey Descriptions
YTF TUNE COARSE YTF Tune Coarse
DESCRIPTION Note that this function is available for 8592L, 8593E,
8595E, and 8596E spectrum analyzers only.
Displays the output of the YTF coarse-tune DAC
produced on the A7 analog interface assembly.
The instrument must be in a single-band sweep for the
display to be valid.
The lower four divisions of the screen represent a 0 to
−10 V output range. Midscreen represents 0 V and
bottom-screen represents −10 V.
The DAC voltage level is displayed as a horizontal line
within the four lower divisions. The voltage becomes
more negative as the center frequency is increased.
Refer to Chapter 6 for further troubleshooting
information.
R
ELATED SOFTKEYS YTF TUNE FINE
YTF DRIVER
YTF SPAN
YTF TUNE FINE YTF Tune Fine
DESCRIPTION Note that this function is available for 8592L, 8593E,
8595E, and 8596E spectrum analyzers only.
Displays the output of the YTF fine-tune DAC on the
Analog Interface assembly. This DAC voltage provides
only fine adjustment of the YTF tuning; there is no
direct correlation between the DAC voltage and the
center-frequency setting.
The instrument must be in a single-band sweep for the
display to be valid.
The lower four divisions of the screen represent a 0 to
−10 V output range. Midscreen represents 0 V and
bottom-screen represents −10 V.
The DAC voltage level is displayed as a horizontal line
within the four lower divisions.
Refer Chapter 6 for further troubleshooting
information.
To Next Page
Loading...
Need help?
General
