2
EPM-P series power meters
The EPM-P series power meters provide peak, peak-to-average ratio,
average and time-gated power measurements. For peak, peak-to-average
ratio and time-gated measurements, the EPM-P series must operate
with the E-series E9320 power sensors. For average power measure-
ments only, the EPM-P series power meters are compatible with all the
8480 series power sensors, the E-series CW, the E-series E9300 average
power sensors, and the E-series E9320 power sensors.
The standard EPM-P series power meters include:
• Single-channel power meter, order E4416A
or dual-channel power meter, order E4417A
• Input sensor connector(s) on front panel
• Reference calibrator connector on front panel
• Hardcopy English-language Installations Guide
• CD-Rom, the English-language and localized User’s Guide,
the English-language Programming Guide and the
Agilent EPM-P analyzer software
• Supplied accessories:
Power sensor cable (1.5 meter (5 ft) E9288A)
One per E4416A and two per E4417A
Power cord (plug matches destination requirements)
EPM series power meters
The EPM series power meters provide average power measurements.
The standard E4418B and E4419B power meters include:
• Single-channel power meter, order E4418B
or Dual-channel power meter, order E4419B
• Input sensor connector(s) on front panel
• Reference calibrator connector on front panel
• English-language User’s Guide and Programming Guide
• Supplied Accessories:
Power sensor cable (1.5 meter (5 ft) 11730A).
One per E4418B and two per E4419B
Power cord (plug matches destination requirements)
E-series power sensors
The standard E4412A and E4413A CW power sensors include:
• Power sensor 10 MHz to 18 GHz, order E4412A
Power sensor 50 MHz to 26.5 GHz, order E4413A
• English-language Operating and Service Manual
The standard E9300 average power sensors include:
+20 to –60 dBm:
• Power sensor 10 MHz to 18 GHz, order E9300A
• Power sensor 10 MHz to 6 GHz, order E9301A
• Power sensor 9 kHz to 6 GHz, order E9304A
+30 to –50 dBm:
• Power sensor 10 MHz to 18 GHz, order E9300H
• Power sensor 10 MHz to 6 GHz, order E9301H
To Next Page
Loading...
Need help?
General
