210 Chapter 4
Instrument Functions: P - Z
Peak Search
Instrument Functions: P - Z
Example: CALC:MARK:PEAK:SEARC:MODE PAR sets the parameter search mode.
CALC:MARK:PEAK:THR –60 dBm sets the threshold to –60 dBm.
CALC:MARK:PEAK:EXC 30 dB sets the minimum peak excursion
requirement to 30 dB.
CALC:MARK:STAT ON turns on marker number 1 and puts it on the active
trace at mid screen.
CALC:MARK:MAX puts marker 1 on the highest peak that is at least 30 dB
above the –60 dBm threshold.
:CALC:MARK:Y? returns the y-axis (amplitude) value of the marker in
current y-axis units.
To Next Page
Loading...
