Page 5 of 8 E5061B-05
Bulkhead USB Cable Assembly
The steps to replace from 5012-8672 to 0960-2972 are as follows.
Step-1: Replace E5061-61617 with E5061-61627.
Connect the both end connectors of the wire assembly part properly.
Step-2: Paste a cable clamp 1400-1334 to the proper location as the picture.
Step-3: Replace E5061-00601 with E5061-00611.
Paste the cable clamp parts (1400-3156, 1400-1391 and 1400-3337) to the individual proper location on the
back cover as the picture.
To Next Page
Loading...
