Agilent Technologies n5181a - Page 192

176 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
SCPI Compatibility
E44xxB Compatible Commands
:MMEMory:MOVE <src_file>,<dest_file> ✓
:MMEMory:STORe:ARB:ALL ✓
:MMEMory:STORe:LIST "<file name>" ✓
:MEMory:STORe:LIST "<file name>" 3
Output Subsystem
:OUTPut:BLANking:AUTO ON|OFF|1|0
:OUTPut:BLANking:AUTO?
✓
:OUTPut:BLANking[:STATe] ON|OFF|1|0
:OUTPut:BLANking[:STATe]?
✓
:OUTPut:MODulation[:STATe] ON|OFF|1|0
:OUTPut:MODulation[:STATe]?
✓
:OUTPut:PROTection:CLEar ✓
:OUTPut:PROTection:MODE "NORMAL"|"8648"
:OUTPut:PROTection:MODE?
–
:OUTPut:PROTection[:STATe] ON|OFF|1|0
:OUTPut:PROTection[:STATe]?
✓
:OUTPut:PROTection:TRIPped? ✓
:OUTPut:SETTled:POLarity NORMal|INVerted
:OUTPut:SETTled:POLarity?
–
:OUTPut:SETTled:RFOFf NORMal|INVerted
:OUTPut:SETTled:RFOFf?
–
:OUTPut:SETTled[:STATe]? –
:OUTPut[:STATe] ON|OFF|1|0
:OUTPut[:STATe]?
✓
Route Subsystem
:ROUTe:HARDware:DGENerator:... – This subsystem is not supported.
Table 6-1 E44xxB Program Codes and Equivalent SCPI Sequences
3 = Supported by Agilent MXG
– = Not supported by Agilent MXG
E44xxB
Remarks