182 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
SCPI Compatibility
E44xxB Compatible Commands
[:SOURce]:RADio:CDMA2000:ARB:... – This subsystem is not supported.
CDMA2000 BBG Subsystem
[:SOURce]:RADio:CDMA2000[:BBG]:... – This subsystem is not supported.
Custom Subsystem
[:SOURce]:RADio:CUSTom:... – This subsystem is not supported.
Data Subsystem
:DATA:... – This subsystem is not supported.
Digital Modulation Subsystem
[:SOURce]:BURSt:SOURce INTernal[1] ✓ Supported but the following parameter is not
supported: EXTernal[1]
Supported but the following query is not
supported:
[:SOURce]:BURSt:SOURce?
[:SOURce]:DM:BBFilter <value>|THRough
[:SOURce]:DM:BBFilter?
✓ Command accepted without error but does
nothing.
[:SOURce]:DM:EXTernal:POLarity NORMal|INVerted
[:SOURce]:DM:EXTernal:POLarity?
✓
[:SOURce]:BURSt:STATe ON|OFF|1|0
[:SOURce]:BURSt:STATe?
✓
[:SOURce]:DM:EXTernal:ALC:BANDwidth|BWIDth
NORMal|NARRow
[:SOURce]:DM:EXTernal:ALC:BANDwidth|BWIDth?
✓
[:SOURce]:DM:EXTernal:HICRest[:STATe]
ON|OFF|1|0
✓ Supported but the following query is not
supported:
[:SOURce]:DM:EXTernal:HICRest[:STATe]?
[:SOURce]:DM:IQADjustment:Gain <value><unit>
[:SOURce]:DM:IQADjustment:Gain?
✓
[:SOURce]:DM:IQADjustment:IOFFset
<value><unit>
[:SOURce]:DM:IQADjustment:IOFFset?
✓
Table 6-1 E44xxB Program Codes and Equivalent SCPI Sequences
3 = Supported by Agilent MXG
– = Not supported by Agilent MXG
E44xxB
Remarks