208 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
SCPI Compatibility
E4428C/38C Compatible Commands
[:SOURce]:PM[1]|2:INTernal[1]:FREQuency:ALTern
ate <value><unit>
[:SOURce]:PM[1]|2:INTernal[1]:FREQuency:ALTern
ate?
–
[:SOURce]:PM[1]|2:INTernal[1]:FREQuency:ALTern
ate:AMPLitude:PERCent <value><unit>
[:SOURce]:PM[1]|2:INTernal[1]:FREQuency:ALTern
ate:AMPLitude:PERCent?
–
[:SOURce]:PM:INTernal:FREQuency:STEP[:INCRemen
t]
[:SOURce]:PM:INTernal:FREQuency:STEP[:INCRemen
t]?
✓
[:SOURce]:PM[1]|2:BANDwidth|BWIDth NORMal|HIGH
[:SOURce]:PM[1]|2:BANDwidth|BWIDth?
✓
[:SOURce]:PM[1]|2:EXTernal[1]:COUPling AC|DC
[:SOURce]:PM[1]|2:EXTernal[1]:COUPling?
✓
[:SOURce]:PM[1]|2:EXTernal[1]|2:IMPedance
<50|600>
[:SOURce]:PM[1]|2:EXTernal[1]|2:IMPedance?
✓
[:SOURce]:PM[1]|2:INTernal[1]|2:FUNCtion:NOISe
GAUSsian|UNIForm
[:SOURce]:PM[1]|2:INTernal[1]|2:FUNCtion:NOISe
?
–
[:SOURce]:PM[1]|2:INTernal[1]|2:FUNCtion:RAMP
POSitive|NEGative
[:SOURce]:PM[1]|2:INTernal[1]|2:FUNCtion:RAMP?
–
[:SOURce]:PM[1]|2:INTernal[1]:FUNCtion:SHAPe
SINE
[:SOURce]:PM[1]|2:INTernal[1]:FUNCtion:SHAPe?
✓ Supported but the following parameters are
not supported:
TRIangle|SQUare|RAMP|NOISe|DUALsine|
SWEPtsine
Table 6-2 E4428C/38C Program Codes and Equivalent SCPI Sequences
3 = Supported by Agilent MXG
– = Not supported by Agilent MXG
N51xxA
Remarks
To Next Page
Loading...
