Agilent Technologies n5181a - Page 235

Agilent N5181A/82A MXG Signal Generators SCPI Command Reference 219
SCPI Compatibility
E4428C/38C Compatible Commands
:DISPlay:REMote ON|OFF|1|0
:DISPlay:REMote?
✓
:DISPlay[:WINDow][:STATe] ON|OFF|1|0
:DISPlay[:WINDow][:STATe]?
✓
Dual ARB Subsystem
[:SOURce]:RADio2:ARB:VCO:INTernal:SOURce:BBG1
ON|OFF|1|0
[:SOURce]:RADio2:ARB:VCO:INTernal:SOURce:BBG1?
–
[:SOURce]:RADio[1]:ARB:CLIPping
"filename",IJQ|IORQ,<10-100%>[,<10-100%>]
✓
[:SOURce]:RADio[1]:ARB:DACS:ALIGn ✓
[:SOURce]:RADio[1]:ARB:GENerate:SINE
["filename"],[<osr>],[<scale>],[I|Q|{IQ}]
✓
[:SOURce]:RADio[1]:ARB:HEADer:CLEar ✓
[:SOURce]:RADio[1]:ARB:HEADer:RMS
<"filename">, <rms:0 -
1.414213562373095>|UNSPecified
[:SOURce]:RADio[1]:ARB:HEADer:RMS?
<"filename">
✓
[:SOURce]:RADio[1]:ARB:HEADer:SAVE ✓
[:SOURce]:RADio[1]:ARB:HCRest[:STATe]
ON|OFF|1|0
[:SOURce]:RADio[1]:ARB:HCRest[:STATe]?
✓ Command accepted without error but does
nothing.
[:SOURce]:RADio[1]:ARB:IQ:EXTernal:FILTer
40e6|THRough
✓ Commands are accepted by the signal
generator, but no action is taken. But the
following query is not supported and
generates an ERROR: –113, Undefined
header:
[:SOURce]:RADio[1]:ARB:IQ:EXTernal:FILTer?
Table 6-2 E4428C/38C Program Codes and Equivalent SCPI Sequences
3 = Supported by Agilent MXG
– = Not supported by Agilent MXG
N51xxA
Remarks