5
Instrument Upgrades
Upgrade your existing MXE
Description Upgrade number Additional information
Increase analysis bandwidth from 10
MHz to 25 MHz
N9038AK-B25
Additional removable solid-state drive N9038AK-SSD
Add Y-axis screen video output N9038AK-YAS
USB DVD-ROM/CD-R/RW drive N9038AK-DVR
Keyboard, USB interface N9038AK-KYB
US 65 key USB keyboard N9038AK-KB2
Rack mount and handle kit N9038AK-1CP Not compatible with Options 1CM and 1CN
Front handle kit N9038AK-1CN Not compatible with Options 1CM and 1CP
Rack mount kit N9038AK-1CM Not compatible with Options 1CP and 1CN
External source control kit N9038AK-ESC
Type "N" connector for input
1
N9038AK-CNF Makes both inputs 1 and 2 type-N connectors
3.5 mm connector for input
1
N9038AK-C35 Input 2 remains type-N
Hardware to enable monitor spectrum,
APD, and time domain scan
N9038AK-HL4
Time domain software N9038AK-TDS
LISN control hardware N9038AK-LSN
1. Applies to Options B25 and YAS only.
2. At the time of manufacture, the hardware related to many of these options was fully adjusted and the option performance was verified to
be within its warranted specifications. Within one year of the initial calibration date of the analyzer, this option is fully calibrated with no
further adjustment or verification testing.
3. If this analyzer has been adjusted as part of a repair or calibration during its first year, or if the analyzer is more than one year old, additional
adjustment and performance verification tests are required to ensure that some newly installed options are functioning properly. However,
the completion of these tests does not guarantee that the analyzer meets all warranted specifications.
www.agilent.com/find/mxe_upgrades
Fast license-key upgrades for performance options that do not require additional hardware:
1
1. Place an order for the upgrade with Agilent and request to receive the software entitlement certificate through email
2. Redeem the certificate through the Web by following the instructions on the certificate
3. Install the license file and latest software in the MXE
4. Begin using the new capability
2, 3
To Next Page
Loading...
Need help?
General
