Quick Start Guide 2
Agilent Nano Indenter G200 User’s Guide 2-35
Look at the actual sample in the cabinet to make sure that the sample is
sitting under the microscope. If not, right-click anywhere on the
schematic map and select Initialize from the resulting pop-up menu, as
shown in
Figure 2-44. Then repeat step 18 and step 19.
Figure 2-44Select Initialize from right-click menu
20 Right-click anywhere on the schematic map and select Nano Video
HandSet from the resulting pop-up menu, as shown in
Figure 2-45.
Figure 2-45Select Nano Video Handset from right-click menu
21 As shown in Figure 2-46 on page 2-36, use the microscope
brightness control and coarse/fine focus controls to lighten the image
and bring it into focus.
To Next Page
Loading...
