Quick Start Guide 2
Agilent Nano Indenter G200 User’s Guide 2-37
23 Once a satisfactory area is located, click the Define Array of Tests
Beginning at this Location button, as shown in
Figure 2-48.
Figure 2-48Define Array of Tests Beginning at this Location button
This will open a dialog box like the one shown in Figure 2-49 to create a
2 x 2 array with sequential tests 50 microns apart.
24 Type the values shown in Figure 2-49 to create the array.
25 Click OK.
Figure 2-49Dialog box to define a test array
To Next Page
Loading...
