Agilent Technologies Nano Indenter G200 - Page 57

Quick Start Guide 2
Agilent Nano Indenter G200 User’s Guide 2-38
26 Click the Next Step button.
27 In the resulting dialog box, shown in Figure 2-50, click No.
Figure 2-50Batch Setup dialog box
28 In the Batch Configuration dialog box (Figure 2-51), click Save
Batch.
Figure 2-51Save Batch, outlined in red, in the Batch Configuration
dialog box
This will open the Save Batch File dialog box.
NOTE
If you are using a DCM, use a separation distance of 20 microns rather
than 50.