Solving Problems
Returning a Signal Generator to Agilent Technologies
Chapter 488
Returning a Signal Generator to Agilent Technologies
To return your signal generator to Agilent Technologies for servicing, follow these steps:
1. Be prepared to give your service representative as much information as possible regarding
the signal generator’s problem.
2. Call the phone number listed in Table 4-1 appropriate to the signal generator’s location.
After sharing information regarding the signal generator and its condition, you will
receive information regarding where to ship your instrument for repair.
3. Ship the signal generator in the original factory packaging materials, if they are available.
If not, use similar packaging to properly protect the instrument.
To Next Page
Loading...
