First Edition, December 1, 2009
© Agilent Technologies, Inc., 2009
Agilent Technologies
Degradation of some product specifications can occur in the
presence of ambient electromagnetic (EM) fields and noise
that affects the product’s power line or I/O cables. The
product self-recovers and operates to all specifications
when:
• the source of the ambient EM field and noise is removed,
• the product is protected from the ambient EM field, or
• the product cabling is shielded from the ambient EM noise.
Safety Notices Safety Information
The Agilent U1731B and U1732B are
safety-certified in compliance with the
following safety and EMC requirements:
• IEC 61010-1:2001/EN 61010-1:2001 (2nd
Edition)
• CISPR 11:2003+A1:2004
• IEC 61000-4-2:1995+A1:1998 +A2:2000
• IEC 61000-4-3:2006
• IEC 61000-4-4:2004
• IEC 61000-4-5:2005
• IEC 61000-4-6:2003+A1:2004+A2:2006
• IEC 61000-4-11:2004
• Canada: ICES/NMB-001:2004
• Australia/New Zealand: AS/NZS
CISPR11:2004
Safety Symbols
A CAUTION notice denotes
a hazard. It calls attention
to an operating procedure,
practice, or the like that, if
not correctly performed or
adhered to, could result in
damage to the product or
loss of important data. Do
not proceed beyond a CAU-
TION notice until the indi-
cated conditions are fully
understood and met.
A WARNING notice
denotes a hazard. It calls
attention to an operating
procedure, practice, or the
like that, if not correctly
performed or adhered to,
could result in personal
injury or death. Do not pro-
ceed beyond a WARNING
notice until the indicated
conditions are fully under-
stood and met.
Earth (ground) terminal
Equipment protected
throughout by double insula-
tion or reinforced insulation
Caution, risk of electric
shock
Caution, risk of danger (refer
to the instrument manual for
specific Warning or Caution
information)
For further safety information details, refer to the
Agilent U1731B/U1732B Dual Display LCR Meter User’s and Service Guide.
Printed in Malaysia
U1731-90051
To Previous Page
Loading...
Need help?
General
