Agora Bismarck - Page 14

2401
2402
2401
D1
D3
2402
2401
D4
D2
D5
01
02
03
Cut two rain hoods (D1 and D2) and
two storage cupboards (D3 and D4)
from the plastic frame 24-03. Smooth
off any rough edges where the parts
have been cut from the frame and test
the fit. Fix parts D1 and D3 to the port
side of the assembled decks 24-01 /
24-02, as shown, using a little
superglue.
Turn the deck around and fix parts D2
and D4 to the starboard side of the
assembled decks 24-01 / 24-02, as
shown, using a little superglue.
The final part on the frame 24-3 is
another rain hood, D5. Cut it from the
frame, smooth off any rough edges after
cutting and test the fit. Fix it to the
starboard side of deck part 24-01 as
shown, using a little superglue.
02. ACCESSORIES FOR THE SIDE OF THE SUPERSTRUCTURE DECK
14
14
AGORAMODELS BISMARCK
PB
AGORAMODELS BISMARCK