Need help?Do you have a question about the AGROPLAST P-100 and is the answer not in the manual?
General| Type | Centrifugal Pump |
|---|---|
| Power Source | Electric |
| Maximum Flow Rate | 100 l/min |
| Inlet Size | 1 inch |
| Outlet Size | 1 inch |
| Max Flow Rate | 100 l/min |
| Frequency | 50 Hz |
| Voltage | 220V |
| Inlet/Outlet Size | 1 inch |
Covers warranty period, conditions, exclusions, and terms for the P-100 pump.
Lists and identifies all components of the P-100 pump with their catalog numbers.
Provides key specifications including efficiency, speed, oil type, dimensions, and weight.
Highlights features like needle bearings, aluminum piston, and low heat emission for durability.
Details the intended application of the membrane-pressure pump in field spraying machines.
Guides on initial setup, oil level check, and pressure adjustment before operation.
Outlines essential checks, rinsing procedures, and seasonal maintenance for long-term pump performance.
Step-by-step instructions for draining and refilling the pump's oil.
Details the process for removing and installing new check valves, noting positioning.
Instructions for replacing pump membranes, including initial disassembly and reassembly.
Procedure for replacing the diaphragm in the air vessel, including air release and cap removal.
Emphasizes using only genuine parts for repairs and refurbishing the pump.
To Next Page