To Next PageTo Next PageWhy is the bead breaker operation difficult on my AGT INDUSTRIAL Tyre Changer?
If the bead breaker on your AGT INDUSTRIAL Tyre Changer is difficult to operate, it could be due to silencer trouble or a damaged cylinder sealing ring. Try cleaning or replacing the silencer. If that doesn't solve the problem, replace the sealing ring of the bead breaker cylinder.
What to do if the turntable doesn't rotate on my AGT INDUSTRIAL AGT-TC24 Tyre Changers?
If the turntable on your AGT INDUSTRIAL Tyre Changer doesn't rotate, the issue could stem from several causes. First, check if the belt is damaged. If so, replace it. Second, the universal switch might be faulty; in that case, replace it. Lastly, there could be motor trouble, requiring motor replacement.
How to fix the working head touching the rim on my AGT INDUSTRIAL AGT-TC24?
If the working head of your AGT INDUSTRIAL Tyre Changer touches the rim during operation, it may be due to an incorrect or damaged locking plate position. Try adjusting or replacing the locking plate. Alternatively, the turntable locking screw might be loose; in this case, tighten the screw.
What to do if the turntable doesn't lock the rim correctly on my AGT INDUSTRIAL AGT-TC24?
If the turntable on your AGT INDUSTRIAL Tyre Changer doesn't lock the rim correctly, it could be due to a damaged clamp. If so, replace the clamp. Alternatively, the cylinder of the turntable might be damaged, requiring you to replace the sealing ring of the cylinder.
General| Motor Power | 0.75 kW |
|---|---|
| Air Supply | 8 - 10 bar |
| Bead Breaker Force | 2500 kg |
| Max Wheel Diameter | 41 inches |
| Dimensions | 960x760x950 mm |
| Max Wheel Width | 14″ (355 mm) |
