GEN BUS 1 and 2 : ON.
GEN 1 and 2 : ON
Force trim : ON.
Electronic Display Units (EDU 1 and
EDU 2) : Check on.
NOTE
Both EDUs are automatically activated when the helicopter is
electrically powered: EDU 1 in CRUISE mode and EDU 2 in
MAIN mode.
EDU 1 : Select MENU, press TEST key
and check the following test
sequences on both EDUs.
NOTE
The TEST function can also be selected on EDU 2.
EDU 1 : The test sequence shall display
the CRUISE format with the
following data:
N1 97.4%
TOT 820°C
TRQ 100%
NR/N2 101%
The caution and warning mes-
sages, stimulated by the DAU,
shall be presented in the mes-
sage area during test routine.
NOTE
During the test the DAU will activate the MASTER
WARNING/MASTER CAUTION lights, the ENG FIRE warning
message and it will also illuminate the engine power lever grips.
If a failure is detected on engine fire and/or fuel low detectors, the
caution message FIRE DET and/or F LOW FAIL will appear.
RFM A109E
R.A.I. Approved 2-17
Rev. 18
To Next Page
Loading...