26
10. MENU SELECTION
Via menu selection (see 9.1) it is also possible to select3 measuring menus
1.
M Sensor display
see 11.1
2.
M Measuring points list
see 11.4
3.
M U1 Data logger
see 11.5, 11.6 plus
4.
F Function menus
see 12
and 3 programming menus :
5.
P Sensor programming
see 13
6.
P Device configuration
see 14
7.
P Output modules
see 15 (if available)
To obtain the most important device data press key(s) : INFO
Here, if you have any questions, you can find the
exact device type together with its firmware ver-
sion, options, and serial number. Here, you can
select any sensor by pressing key(s) ▲ / ▼ and
identify it on the basis of its order number (if avail-
able). To determine the power supply require-
ments both the battery voltage and the sensor volt-
age can be called up. You can also obtain help at
our WEB address.
To Next Page
Loading...
