12. Function menus
52
be programmed. The total measuring time since starting can be seen in the func-
tion Measuring time.
This is assuming of course that the current time-of-day has been programmed. Sleep
mode takes no account of end time or measuring duration.
To select the menu press key : < ►F >
Function Measuring duration (format hh:mm:ss):
Meas duration : 00:10:00
Start time function (format hh:mm:ss):
Start time : 07:00:00
End time function (format hh:mm:ss):
End time : ------
Start date function (format dd:mm:yy):
Start date : 01.05.07
End date function (format dd:mm:yy):
End date : ------
Measuring time since start (format hh:mm:ss.hh):
Meas time : 00:01:23.45
These values can be cleared after selecting the function by pressing : <OFF>
If the start time for a measuring operation has been programmed,
the following symbol appears in the status bar : ´ ´
If the end time or the measuring duration for a measuring operation has been
programmed, the following symbol appears in the status bar : ´ ´
To Next Page
Loading...
