13. Sensor programming
64
Measuring inputs B+ and A-, GND-referred 1 Multiplexer: B-A
Measuring inputs C+ and A-, GND-referred 1 Multiplexer: C-A
Measuring inputs D+ and A-, GND-referred 1 Multiplexer: D-A
Differential measuring inputs C+ and B- 1 Multiplexer: C-B
Differential measuring inputs D+ and B- 1 Multiplexer: D-B
13.12.8 Element flags
Element flags can be activated per measuring channel to implement additional
functions specific to each sensor (see Manual 6.10.3).
1. 1/10 measuring current for Pt1000, 5000
3. Measuring bridge with switch for end-value simulation
4. Measuring channel, cyclic evaluation only
7. Disable sensor breakage detection
8. Analog output 4-20 mA instead of 0-20 mA
On the ALMEMO 2590A element flags 2, 5, 6 have no function.
Function Element flags :
Element flags: 87654321
To program element flags : PROG
Element flags:
To select element flags : ► and ◄
To enable / disable element flags : ▲ and ▼
To Next Page
Loading...
