Ahlborn ALMEMO - Starting Calibration Via AMR Wincontrol

7 Evaluate measured values in AMR WinControl
- 14 –
12. Enter the device address of the ALMEMO
®
measuring device as the device
number (preset to 00).
13. Click on
OK.
 The ALMEMO
®
measuring device is connected to the AMR WinControl
software.
7.2 Starting calibration via AMR WinControl
! The assistant for calibrating climatic chambers must be installed.
→ Follow the brief documentation AMR WinControl climatic chamber
calibration to create hardware profiles and calibration programs and to carry
out the calibration.