The Aidapt Plastic Bath Step (VR278D) is a device designed to assist individuals, particularly the elderly or disabled, in safely entering and exiting a bath by providing an elevated, stable surface. Its primary function is to reduce the height difference between the bathroom floor and the rim of a bathtub, thereby minimizing the effort and risk associated with stepping over the bath side. This product is manufactured from quality materials and components, intended to offer reliable, trouble-free service over many years when used correctly.

Function Description:

The core function of the Plastic Bath Step is to offer a secure, intermediate step that bridges the gap between the floor and the bath. This elevation makes the act of stepping into or out of the bath less strenuous and reduces the likelihood of falls, which are a significant concern for individuals with mobility challenges. By providing a stable platform, the bath step helps users maintain balance and control during the transfer process. The design emphasizes stability and safety, ensuring that the step remains firm underfoot during use.

Usage Features:

Before using the Plastic Bath Step, it is crucial to carefully remove all packaging, taking care not to damage the product's surface with sharp instruments. A thorough inspection for any visible damage or suspected faults is essential; if any issues are found, the product should not be used, and the supplier should be contacted for support, as continued use could compromise safety.

When positioning the bath step, it is vital to ensure that the step is completely dry and free from any soap or oil film, which could create a slippery surface. Furthermore, the back of the step must be positioned firmly against a solid, upright surface to prevent it from moving forward during use. This secure placement is critical for maintaining stability and preventing accidental shifts.

Users should step centrally onto the step with both feet, ensuring their weight is evenly distributed across the surface. It is important to test the step for stability before fully committing weight to it. A critical safety instruction is to NEVER step onto the edge of the step, as this can cause it to tip, leading to a fall. Always aim for the middle of the step top.

The bath step is designed for use only when dry, and the surface beneath it should also be dry to minimize the risk of slipping. Users should NEVER jump onto or off the step, as this can destabilize the unit and lead to injury. As with all assistive devices, users should avoid sudden or undue movements while using the bath step.

A unique feature of the Aidapt Plastic Bath Step is its ability to be stacked. Multiple bath steps can be used together to increase the overall height. This is achieved by simply stacking two or three steps one on top of the other, ensuring that each step is fully pushed down onto the step below to create a secure, multi-level platform. This adjustability allows users to customize the step height to their specific needs, providing greater flexibility and comfort.

It is important to note that the bath step is not a toy, and children should always be supervised when in its vicinity to prevent misuse or accidents. The maximum weight limit for the bath step must not be exceeded, as doing so could put the user at risk.

Maintenance Features:

Proper cleaning and maintenance are essential to ensure the longevity and safety of the Plastic Bath Step. All components are made from quality materials, but it is crucial to use only a non-abrasive cleaner or a mild detergent with a soft cloth for cleaning. Abrasive cleaners or abrasive cleaning pads should be strictly avoided, as they can seriously damage the product's surface beyond repair. Regular cleaning helps maintain hygiene and the integrity of the step's surface.

Special caution is advised regarding the use of bath oils or oily skin preparations. If any form of bath oil is used, it may impair the natural contact skin resistance of the step, making it slippery. In such cases, the bath step must be thoroughly cleaned with a suitable detergent to break down and remove any oily residue. Failure to follow this recommendation could compromise user safety.

For ongoing safety, it is recommended to perform a safety check of the product at regular intervals, or whenever there are any concerns about its condition. This proactive approach helps identify any potential issues before they become a hazard.

If the product is to be reissued or used by another individual, all components should be thoroughly checked for safety. In case of any doubt regarding its condition or safety, the product should not be issued or used, and the supplier should be contacted immediately for service support.

The information provided in the instruction booklet is intended to guide users on the safe and effective use of the product. Users are encouraged to exercise common sense and avoid unnecessary risks. As the user, you must accept liability for safety when using the product. Should any queries arise concerning the assembly or use of the product, users should not hesitate to contact the person who issued the product or the manufacturer.

aidapt VR278D - Page 4