Aideepen ESP32-CAM - Page 2

2
6 Mbps (½ BPSK): -88 dBm
54 Mbps(¾ 6-QAM): -70 dBm
MCS7(65 Mbps, 72.2 Mbps): -67 dBm
Power Supply Range
5V / 3,3V
Operating Temperature
-20°C ~ 85°C
Pinout
Instructions
In order to be able to program the ESP32 cam in the Arduino IDE you must Install
support for the ESP32 platform.
Open the Arduino IDE and go to: