EasyManua.ls Logo

AIGOSTAR 30KLR - Instruction for Use; Preparatory Work

AIGOSTAR 30KLR
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
25 This appliance should not be used by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have are supervised by the person who is responsible
for their safety.
Children should be supervised to ensure that they do not
play with the appliance
Instruction for use
1Before use preparatory work
(1).Before first use, fill the kettle with clean water to maximum
capacity and boilDiscard the water and repeat the process
twice
Note : New bought kettle have a kind of light odor which caused by mould
opening during manufacturing. It is normal and not harmful to your
health.
(2).The kettle should always be unplugged when filling or adding
water
(3).Fill the kettle with water to desired levelDo not overfill or there
will be a risk of spillage or spittingThe water level indicator will
assist you to measure the correct amountYou can fill the kettle via
the spout or after opening the lidDo not forget to close the lid
after filling, otherwise the kettle will not automatically switch off
after use
(4).Do not fill with less than 0.5 liters of waterto “min” indication
to prevent the kettle running dry while operating
(5).Do not fill with less than 1.7 liters of waterto “max”
GB