6
(Note: Only under such operation, will the kettle be with heat
insulation function. And this function will be invalid if the kettle
body is taken away from the base. Need to reset to start this
function.)
5. Press “ ”shortly, with the buzzer sends out “di” sound, the kettle is
under boiling water condition.
Press“ ”once, then the indicator light is under 60℃ condition
with green LED light. This means that it will stop heating when the
water temperature is 60℃.
Press“ ”twice, then the indicator light is under 70℃ condition
with blue LED light. This means that it will stop heating when the water
temperature is 70℃.
Press“ ”thrice, then the indicator light is under 80℃ condition
with yellow LED light. This means that it will stop heating when the
water temperature is 80℃.
Press“ ”the fourth time, then the indicator light is under 90℃
condition with purple LED light. This means that it will stop heating
when the water temperature is 90℃.
6．After the use finished, please put plug off the power socket．
How to care for your kettle
Wipe the exterior of the kettle with a soft, damp cloth or sponge．
Remove stubborn spots with a cloth moistened with mild liquid
detergent．Do not use abrasive scouring pads or powers．Never immerse
the kettle in water or other liquids．From time to time, depended on the
nature of your water supply, a boiled scale deposit is naturally formed and
can be found mostly adhered to the heating element, thus reducing the
heating efficiency．The amount of boiled scale deposited（and
To Next Page
Loading...