Aiphone JM-4MED - Page 15

15
<Surface wiring>
When the wiring is not coming through the wall, the cable and wires can be routed through the top or bottom of the cable inlet.
Remove cable inlet plate on the upper part of the unit to allow passage of the wiring into the unit.
■
JMW-BA
Mount the unit directly on the wall using wood mounting screws.
■
JM-8Z
Mount the unit directly on the wall using wood mounting screws.
Cable inlet plate
Mounting bracket
(pre-attached by factory)
The unit
The unit
The unit
Wood mounting screw × 4
(included)
Wood mounting screw
(Ø4.1, slotted head: Ø8.2 or less) × 2
(not included)
Wood mounting screw
(Ø4.1, slotted head: Ø8.2 or less) × 2
(not included)
Wires
CAT5e cable
83.5mm (3-5/16")
59.5mm (2-3/8")
59.5mm (2-3/8")
104.5mm
(4-1/8")
104.5mm
(4-1/8")
92mm (3-5/8")