Aiphone NEM Series - Page 3

4 M O U N T I N G ----
★ Do not attempt to install your intercom system until you have read and thoroughly understand the installation
procedure. Aiphone's warranty is void if system is installed in a manner other than as described in this
manual.
Cradle Mounting Single-gang
83.5mm
3-5/16"
■ Wall-mounting
★ Remove two screws from body and install handset cradle for handset with two screws.
Remove wall hanging bracket from back of unit.
Attach the bracket to wall or box. Connect wires and fit the unit onto the mounting bracket by sliding the unit
down until it locks on the bracket.
5 O P E R A TIONS --—-
To place a call: Simply lift the handset and wait for the master station to answer.
To answer a call through a single NA-T/A, simply lift the handset and talk.
Receiving a call: A pretone and voice is heard when the sub is called by the master. Respond handsfree
through the open voice sub (NA-A, AN, NB-L), or pick up the NA-T/A handeset for a
private two-way conversation.
Note; If the master station hangs up before the NA-T/A, a call tone may be heard at the
master. Call tone will cease when the NA-T/A handset is hung up.
6 S P E C I F I C A TIONS
★ Power source:
★ Calling:
★ Communication:
★ Wiring:
★ Wiring distance:
Supplied by NEM (-A) master.
Pre-tone and voice on both NA-T/A and the standard sub.
Handset voice-actuation on NA-T/A, or handsfree, on standard sub (any).
1 common + 1 indiv. per NA-T/A.
AWG
22AWG
20AWG
18AWG
Distance
420'
650’
1000'
★ Dimensions (H x W x D): 232 x 94 x 105 mm
9-1/8" x 3-3/4" x 4-1/8"
★ Weight: 600g, 1.32 lbs.
- 3 -