Airaid Intake System User Manual

1
#311-110 INSTALLATION INSTRUCTIONS
1997-2002 Jeep TJ 2.5L &
1997-2004 Jeep TJ 4.0L (Does Not Fit 2.4L)
Thank you for purchasing the Airaid Intake System. Please read the instruction manual carefully before proceeding with the
installation. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or instructions that are
not clear to you. Your Airaid Intake System was carefully inspected and packaged. Check that no parts are missing, or were damaged
during shipping. If any parts are missing, contact Airaid. The air filter element is protected from direct exposure to water and debris;
care should be taken not to drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILTY!
Thank you for selecting Airaid.
Packing List:
701-421 Filter 3.5”x 9” Short Flange 1
KIT110S Splash Guard 1
KIT110TAC Tube Assembly 1
KIT110A Adapter Tube x1
KIT25C50HCSS Bolt ¼-20x1/2” x2
KIT110FB Long Bracket x1
KIT110RB Short Bracket x1
KIT09FWZ019 ¼” Washer x2
KIT110HPS Hardware Pack 1
KIT110T Nylon Wire Tie x1
KIT09FWZ019 ¼” Washer x8
KIT25C62HCSS Bolt ¼-20x5/8” x4
KIT25CNNES Nut ¼ -20 x4
Tools Required for this Installation:
Ratchet wrench
11 mm socket or wrench
10 mm socket or wrench
8 mm wrench
5/16” socket or nut driver
7/16” socket
7/16” wrench
Flat blade screwdriver
Pliers

Airaid Intake System Specifications

General

Brand	Airaid
Model	Intake System
Category	Water Filtration Systems
Language	English

Summary

Installation Instructions

Disconnect Negative Battery Cable

Safely disconnect the vehicle's negative battery terminal before starting the installation.

Remove Air Filter Housing

Detach the stock air filter housing and lid from the vehicle's engine bay.

Assemble Airaid Tube

Attach the mounting brackets to the Airaid intake tube using provided hardware, but do not fully tighten.

Install Airaid Tube

Position the Airaid tube assembly into the engine bay and align brackets with mounting holes.

Install Splash Shield

Mount the splash shield to the vehicle, securing it with bolts and washers.

Finishing Up Airaid Installation

Perform final checks, reconnect the battery, and verify hardware tightness after driving.

SynthaMax Air Filter Care

Cleaning SynthaMax Filters

Service SynthaMax filters using non-petroleum household cleaner and water; do not use oil.