Airbloc ACR - Page 2

2
Document Index.
1 Installation Requirements
1.1 Introduction
1.2 General
1.3 Electrical Supply
1.3.1 Electronic Controller
1.3.2 SmartElec2 Controller
1.4 Location
1.5 Clearance Distance
1.6 Health and Safety
1.7 Standards
2 Dimensions
2.1 ACR Air Curtain
2.2 Electronic Controller
2.3 Optional SmartElec2 Controller
3 Technical Specifications
3.1 Electrical Heated, Std Capacity 6&9kW 1P
3.2 Electrical Heated, Std Capacity 9-18kW
3.3 Electrical Heated, High Capacity 12-18kW
3.4 Ambient, Std Capacity
3.5 Ambient, High Capacity
3.6 LPHW, Std Capacity
3.7 LPHW, High Capacity
3.8 Electronic Controller
3.9 SmartElec2 Controller
4 Wiring Diagrams
4.1 Installer Wiring Electrically Heated 6&9kW 1P
4.2 Installer Wiring Electrically Heated 9&12kW
4.3 Installer Wiring Electrically Heated 18&24kW
4.4 Installer Wiring Ambient
4.5 Installer Wiring LPHW
4.6 Factory Wiring Electrically Heated 6&9kW 1P
4.7 Factory Wiring Electrically Heated 9&12kW
4.8 Factory Wiring Electrically Heated 18&24kW
4.9 Factory Wiring Ambient
4.10 Factory Wiring LPHW
4.11 Network Wiring Electronic Controller
4.12 Installer Wiring SmartElec2 Controller
4.13 Factory Wiring SmartElec2 Controller
4.14 Network Wiring SmartElec2 Controller
5 Installation Details
5.1 Mounting
5.2 Electrical Supply
5.3 Installation
5.4 Standard Controller
5.5 Option SmartElec2 Controller
5.6 LPHW only
5.7 Wiring
6 Servicing & Maintenance Instructions
7 Spare Parts
7.1 General
7.2 AC-ACR-PANEL Controller
7.3 SmartElec2 Controller
7.4 Heating mediums
8 Fault Finding Guide
8.1 General
8.2 Electrical Heated
8.3 Electronic Controller
8.4 Optional SmartElec2 Controller
8.4.1 Fault Code chart
8.4.2 LED indication
9 Replacing Parts
9.1 Electrical Element
9.1.1 SE
9.1.2 HE
9.2 Rotor and Motor
9.2.1 SE
9.2.2 HE
9.3 LPHW Coil
10 User and Operating Instructions
10.1 Keypad
10.2 Operation
10.3 Engineers Settings
10.3.1 Auto Mode
10.3.2 Door Switch Mode
10.4 Optional SmartElec2 Controller
10.4.1 Keypad
10.4.2 Operation
10.4.3 Network Addressing