Airpes ALE-100/T - User Manual

MANUAL OF INSTRUCTIONS
ELECTRONIC LIMITER
MODEL “ALE-100/T”
Version “M-37”
AIRPES Sistemas Integrales de Manutención y Pesaje S.L.
Polígono Industrial Can Roqueta II
C/ Can Lletget, 3
08202 Sabadell (Barcelona) SPAIN
Tel.: +34 902 42 44 55 Fax: +34 902 42 44 54
Email: airpes@airpes.com
internet: http://www.airpes.com
ALE-100T.VM37.L.S.EN.18-10.0

Summary

Basic Functions

Start Up (ALE-100;T)

Initiate the ALE-100/T device operation.

Weight Adjustment with Push-Buttons (ALE-100;T)

Configure weight calibration using device push-buttons.

Warning of Overload, Slack Cable and Alarms

Understand device warnings for overload, slack cable, and alarms.

Protocol Configuration

Set up communication protocols for device integration.

Operations with the Terminal AMM-40 S

Weight Adjustment and Configurations

Adjust weight and configure parameters using the AMM-40S terminal.

Delays Configuration

Program adjustable time delays for crane movements.

Password Request Procedure

Steps to access parameters by entering the security password.

Password Configuration

Change or set a new access password for the device.

Overload and Intermediate Limit Outputs

Engine Overheating Detection

Download Data from ALE-100;T to Computer

Data Transmission Protocol

Technical specifications for data transfer protocol.

Connection of the Limiter ALE-100;T

Conditions of Guarantee

Declaration of CE (EU) Conformity

Airpes ALE-100/T Specifications

General

Brand	Airpes
Model	ALE-100/T
Category	Control Unit
Language	English