Need help?Do you have a question about the Airspan AirVelocity 1500 and is the answer not in the manual?
General| Category | Wireless Access Point |
|---|---|
| Model | AirVelocity 1500 |
| Weight | 0.5 kg |
| Wireless Standards | IEEE 802.11b/g |
| Frequency Bands | 2.4 GHz |
| Power over Ethernet | 802.3af |
| Antenna Gain | Integrated, 5 dBi |
| Operating Temperature | -20°C to +55°C |
| Channel Bandwidth | 20 MHz |
| Power Supply | 12V DC |
This document details procedures for installing the Airspan's AirVelocity 1500 Indoor-Pico Enterprise eNodeB variant.
Details changes and updates made to the document across different revisions.
Guidelines for RF exposure compliance and radio interference mitigation.
Covers general installation, modifications, safety instructions, and voltage warnings.
Includes European directive compliance, warning symbols, service instructions, and UL information.
Details the supported frequency bands and performance values for the AirVelocity 1500.
Information on the nominal power consumption of the AirVelocity 1500.
Describes the cross-polarized fixed antenna integrated into the unit.
Details the sectorial antenna's behavior for different mounting configurations.
Outlines the guide's purpose and the installation procedures it covers.
Identifies the target readers for this installation guide.
Explains the typographic conventions used throughout the document.
Lists other documents containing related information for the AirVelocity 1500.
Provides contact information for submitting feedback and suggestions.
Provides a descriptive overview of the Airspan's AirVelocity 1500 Enterprise-Pico eNodeB.
Guides users to plan installation using a checklist found in the appendix.
Details the necessary IP connection to a Netspan server for setup.
Verification of tools, parts, power supply, components, dimensions, and environmental compliance.
Procedures for both suspended and conventional ceiling mounting of the AirVelocity 1500.
Step-by-step guide for mounting the AirVelocity 1500 unit to a wall.
Details the status indications provided by the unit's LEDs.
Instructions for connecting the DC power plug to the unit.
Guidance on mounting the AC to POE++/DC power supply unit.
Procedures for managing and connecting Ethernet cables.
Confirms the availability and correctness of GPS kit components.
Describes methods for installing the GPS antenna, including window and bracket mounts.
To Next Page
