Changing the Fuse
1. Push in and turn the fuse holder to the left with a straight screwdriver and remove
the old fuse.
2. Replace it with a spare (spare fuse is located inside the fuse holder).
3. Use a 4 amp fuse, 1.25 inches long.
Cleaning the Pre-Filter
For optimal use, please clean the pre-filter once every 6 months.
1. Pry off the plastic pre-filter casing with a flat-head screwdriver.
2. Clean the pre-filter with soap and water. Completely dry before reinstalling.
12
Spare fuse
To Next Page
Loading...
