14
Motor abnormal
Out of Power or Low
Power
The rolling brush is entangled
with objects like hair
Dirty water has reached its
designated capacity
Wrong assembling of rolling
brush, dirty water cup
The rolling brush is entangled
with objects like hair
The suction nozzle is blocked
The filter mesh above the
float is dirty
Low battery
HEPA dirty
The appliance and the
charging slot are not
properly contacted.
Clean water cup is empty
Clean water cup is not
properly assembled
Missing assembly of HEPA
filter
Missing assembly of float
indicator
HEPA filter is not dry
enough after washing
Dirty water has reached its
full capacity
Problem
Power light Flashing
Appliance Not Working
Weak Suction Power
Cannot Charge
No water out of the
nozzle
Water leakage from
the air outlet tunnel
Possible Causes
TROUBLESHOOTING
Clean the clog in the tube
and restart the appliance
Fully recharge the appliance
before using
Clean the rolling brush
Take out the dirty water tank,
pour out the dirty water
Reassemble the product
Clean the rolling brush
Clean the suction nozzle
Clean the filter mesh
Please fully charge the
product before using
Clean the HEPA filter before
using
Check and properly contact
the appliance
Fill up the clean water cup
Reassemble the Clean
water cup
Assemble the HEPA filter
Assemble the float indicator
HEPA filter needs to dry
ccompletely after washing
Take out the dirty water
tank, pour out the dirty water
Solution
To Next Page
Loading...
