Inserting the batteries
Installing batteries
1. Open the remote control cover " " by
sliding it into the
indicated direction.
2. Place 2 AAA 1.5V batteries inside you
1.ensuring that the position of the poles
1."+" and "-" est correct.
3. Replace the cover of the
1.remote control
User manual
1. Turn on the remote control by pressing the " " button
3. Use " " and " " buttons to adjust the temperature. (The temperature cannot be
3.adjusted under Auto function)
4. Press " " to adjust fan speed: Auto, fan1, fan2, fan3, fan4, fan5,
5. Press SWING to choose the fan angle
Notes:
• Operate the remote control by pointing it at the indoor unit receiver
• To use the remote control, the distance between it and the air conditioner should not exceed 8m
and there should be no obstacles between the two.
•
possible from the air conditioner.
• If the remote control will not be used for a long time, remove the batteries from it.
•
s
To Next Page
Loading...