- 05 -
Take R5 out of the package bag, unfold pedals and kickstand. Push the head in vertical direction
(see Figure 2 -
①
arrow), the folding handle along with the bike head is to be down-and-backward to
the slot and then button up (see Figure 2 -
②
arrow). The state of fastened folding handle is as Figure
3 shows.
②
①
The locking axle and locking bowl are located between the front and rear wheels. Pull the safety
pin between the locking axle and locking bowl gently(see Figure 4-
③
arrow) and rotate 90° to fasten(
the state of safety pin is as Figure 5 shows). Separate the locking axle and locking bowl(see Figure
4-
④
&
⑤
arrow) to separate the front and rear wheels, and rotate safety pin 90° to release.
Use the Bicycle
1
2
Folding
handle
Figure 1
Figure 4
Locking bowl
Locking bowl
Locking axle
Locking axle
Safety pin
Figure 5
Figure 2
Figure 3
To Next Page
Loading...
