Need help?Do you have a question about the aivituvin AIR45 and is the answer not in the manual?
General| Brand | aivituvin |
|---|---|
| Model | AIR45 |
| Category | Farm Equipment |
| Language | English |
Essential safety guidelines for assembly and use, covering securing hardware, avoiding hazards, and proper usage to maintain warranty.
Lists necessary tools and assembly time, including recommendations for efficient setup.
Details all hardware components required for assembly, including specific types, quantities, and product codes for easy identification.
Identifies the lock mechanism (P9) essential for securing the product.
Labels the main sections of the assembled product: Coop, Nesting box, and Pen.
Details front, back, left, right panels, tray, and perch (Parts A-F).
Identifies nesting box dividers, nesting box roofs, and coop roof panels (Parts J-L).
Lists left, right, and front panels for the nesting box (Parts G1, G2, H).
Details the bottom of the nesting box, bottom plate, and various pen panels (Parts I, M-Q).
Identifies the side panel of the pen and the roof panels for the pen (Parts R, S).
Lists the PVC waterproof strip and the hardware bag for assembly (Part T).
Attaches front, back, and side panels using screws (P2).
Slides the metal tray (E) and inserts the perch (F) into the main frame.
Attaches nesting box side panels (G1, G2) to the left side of the coop using bolts (P1).
Attaches nesting box side panels (G1, G2) to the right side of the coop using bolts (P1).
Screws the nesting box front panel (H) to the side panels using screws (P2).
Places the nesting box bottom (I) and slides in the divider (J).
Attaches the nesting box roof panels (K) using screws (P6).
Attaches PVC waterproof strips (T) to the nesting box edges using screws (P5).
Attaches the coop roof panel (L) to the coop structure using screws (P6).
Attaches the lock (P9) to the tray using screws (P6) for securing.
Attaches the roof hinges (P8) to the coop using screws (P6).
Attaches pen panels (N, O) to the coop using screws (P3).
Attaches the bottom baffle (M) to the side using screws (P2).
Attaches pen panels (P, Q) to the structure using screws (P3).
Attaches the side panel (R) to the pen enclosure using screws (P2).
Attaches the pen roof panels (S) to the pen using screws (P4).
Attaches the latch (P7) to the side of the pen using screws (P6).
Formal disclaimer regarding manufacturer and seller liability for issues arising from improper assembly, use, or maintenance.
To Next Page