Aiwa ALP40P User Manual

Note: This does not apply for ceiling mounted projectors.To adjust the vertical angle
of the image, adjust the Height Adjustment Peg on the bottom of the projector as
shown. Turn this Peg clockwise or anticlockwise to adjust the vertical angle.
Adjust The Focus And Keystone
Follow below picture to adjust the focus and trapezoidal screen.
Adjust the focus by turning the knob while
observing the image pixels near the center of the
screen. Optimal focus is obtained when the
pixels are clearly visible. Depending on the
projected screen size, the focus near the screen
edges may be less sharp than the screen center.
Keystone image is created when the projector
beam is projected to the screen in an angle.
Keystone correction will restore the distorted
image to a rectangular or square shape.
7
SCREEN
PROJECTOR
Height Adjustment Peg
FOCUS ADJ. KNOB
Then sharpen the image
by rotating focus knob.
TRAPEZOIDAL ADJ. KNOB
Vertical Angle

Aiwa ALP40P Specifications

General

Light Source Type	LED
Brightness Output	LED bulb 2800 Lumens White light output 40 Lumens
Display Native Resolution	800 x 480
Display Color	16.7K
Projection Size	30-150 inch
HDMI Input Supported Video Resolution.	1080p, 1080i, 720p, 576i, 480p, and 480i
Power Consumption	Operating 36W; Standby 0.8W
Power Input Connect Included Adapter	DC 12V, 4A
Included Adapter Connect DC input of unit	Input AC100-240V, 50/60Hz Output DC12V, 4A
Signal Port	Vi deo / V GA / H DM I
USB Port	Support USB device up to 1TB Support format mpeg1, Mpeg2, mpeg4, mp3, Jpeg
MicroSD Card	Support MicroSD card up to 32GB Support format mpeg1, Mpeg2, mpeg4, mp3, Jpeg

Weight and Dimensions

Weight	0.9 kg
Dimensions	203 x 150 x 82 mm