Aiwa CSD-EX5 - Page 4

DISSASEMBLY INSTRUCTIONS
1. “Cabinet, Front” Removal (See Figure — 1)
1) Remove 9 screws (@) from “Cabinet, Rear”and remove
“Cabinet, Front”.
(*) ©
t t t t Cabinet, Rear
® ® ® ©
Fig — 1
2. “Unit, Center” Removal (See Figure — 2)
1) Open “Lid, Top”. Knob, Power
2)
Remove
“Knob,
Power”,
“Knob,
Volume”
and
then
Knob,
Volume
remove “Unit, Center” as shown in the direction of om
the
arrow.
a
|
:
Lid,
Top
3. “Mechanism Assy” Removal (See Figure — 3)
1) Remove 4 screws (@), “Knob, Tone” and then
remove “Cover, Top”.
2) Remove screw (®) and remove “Mechanism Assy”.
® e Knob, Tone
Mechanism Assy.