After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
12
Instructions (Cont.)
Shelf configuration
• The shelves may be configured to suit various wine bottle shapes and sizes. If storing
larger bottles, make sure that they do not prevent the door from closing properly.
Before shutting the door, always check that you can close it without bottles falling
down inside the cabinet.
• Place the shelves on the shelf support rails with the curved
and straight shelf wires at the front, as shown on the right
(only the shelf coating is different in the picture, which does
not affect storage capacity).
• For standard size bottles, use every third shelf support rail for
the second to fifth shelf, as shown.
Wine fridge capacity
Your wine fridge holds a maximum of 46 standard (750mL traditional Bordeaux-style)
wine bottles. Storing wine in larger or differently shaped bottles may affect its storage
capacity. Do not overload the cabinet, and only store wine in sealed bottles.
The loading diagram below (side and front view) shows how to fit the maximum number
of wine bottles on the shelves; the photos on the next page give you a close-up view of
the stacked shelves.
Every
3rd rail
This side
to front
To Next Page
Loading...