Akai AM-59

Digital
component
connections
(for
AM-69
model
only)
|
Before proceeding DIGITAL 1 (OPTICAL) IN/OUT ter-
e
Turn
off
the
power
of
all
components
before
making
connec-
realtek)
tsa
(
rN
esto
maptvere
(sy
only)
tions.
¢
Whenconnecting
components
tothe
DIGITAL2and3INter-
These
terminals
are
for
connection
of
CD
players
or
DAT
decks
minals, use digital connection cords available from your —_ equipped with optical terminals.
audio dealer. xen : :
e If your DAT deckis equipped with optical input and output ter- Note:
minals, connect it to the DIGITAL 1 (OPTICAL) IN andOUT ~—s» ~When you are not using the DIGITAL 1 (OPTICAL) IN/OUT
terminals
of
the
amplifier
using
optical
fibre
cables.
terminals
do
not
remove
the
terminal
caps.
e Always replace the terminal caps of the DIGITAL 1 (OPTI-
CAL) IN and OUT terminals when a component is not con-
nected to them.
e if your CD player is equipped with both an optical terminal
and analog output terminals, we recommend that connection
only be made to the optical terminal for best sound reproduc-
tion.
® The digital audio signal is a composite signal made up of the
left and right channel signals. For this reason, separate left
and right INPUT and OUTPUT terminals are not necessary.
| OPTICAL |
DAT deck or CD piayer
For DAT deck
OUT
|
DIGITAL 1
(OPTICAL)
DIGITAL OUTPUT
COAXIAL
DIGITAL 2
iN
DIGITAL 3
CD piayer
CD player
(m4)