Akai AM-U02 - VOLTAGE CONVERSION

V. VOLTAGE CONVERSION
POWER TRANSFORMER
AM-U02T-70
AKAT
9070894 <Giion
wae
NOV AREAS:F1 2.54
| 220V AREAS: F2 1.254
}
240V
AREAS:
F3
1.25A
REAR SIDE
Fig. 4 Voltage Conversion (U/T Model)
Models for Canada, USA, Europe, UK, JPN and Australia
are not equipped with this facility.
Each machine is preset at the factory according to
destination but some machines can be set to 110 V
220 V or 240 V as required.
If voltage change is necessary, this can be accomplished
as follows.
1) Disconnect AC Power Cord.
2) Loosen holding screws and remove upper cover.
?
3) Remove existing line voltage fuse and insert re-
quired line voltage fuse in proper fuse holder,
explicitly following instructions printed on rear
panel.
20